Konica Minolta Kodak Ngenuity 9090DB User Guide - Page 53
Replacing the separator roller, Replace Feed Rollers
View all Konica Minolta Kodak Ngenuity 9090DB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Replacing the separator roller 8. Pull the separator roller door forward and hold it in place while you remove the separator roller by lifting it off the cradle. 9. Remove the roller from the rest of the assembly as shown. 5-14 10. Reassemble the components using a new roller, duplicating the assembly. 11. Open and hold the separator roller door to reinstall the separator roller. Align the separator roller correctly with the slots. Align the flat end of the shaft with the slot in the cradle and gently seat the shaft, which should fall in place. Do not apply pressure to seat the shaft. 12. Gently release the separator roller door back in place. Verify that the separator roller is seated level. 13. Close the transport cover. 14. When all four tires on the skimmer rollers and the separator roller have been replaced, reset the maintenance reminder by clicking on the Replace Feed Rollers hyperlink on the Maintenance monitor. 15. Click Yes on the dialog box to confirm the tires/rollers have been replaced. The reminder will be reset for the next required maintenance session. A-61662 April 2010