Kyocera FS-6525MFP Fax System (U) Operation Guide Rev-4.2012.3 - Page 165

Using a Connected Telephone > Manual Reception Manual Reception Use this method when you want to receive originals after talking to the person at the sending system. NOTE FAX Automatic Reception has been preset for the receiving mode of this machine. To use Manual Reception, you need to change the receiving mode to Manual Reception. To change to manual mode, refer to Reception on page 9-8. 1 The telephone rings. When there is an incoming call, the telephone connected to the machine makes a ringing tone. 2 Lift the handset. Lift the handset of the telephone. 3 Check if the telephone line has connected to the fax of the sending system. If the destination is a fax machine, you will hear soft beep sounds. If a person answers, you can talk to that person. 4 Press [On Hook]. Ready to send. 1 FAX 2 On Hook Chain Direct Recall 10:10 Dest. : Check Add Dest. Address Book Functions Ext Address Book One Touch Key Favorites GB0669_00 5 Press [Manual RX]. Ready to send. On Hook 10:10 GB0694_01 Manual RX Line Off Reception will start. NOTE When using a telephone set that can send tone signals, use the telephone to start the reception of originals with the remote switch function. (Refer to Remote Switch Function on page 7-10.) 6 Replace the handset. When reception starts, return the handset to its original position. 7-9