Kyocera FS-6525MFP Fax System (U) Operation Guide Rev-4.2012.3 - Page 166
Remote Switch Function
View all Kyocera FS-6525MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Using a Connected Telephone > Remote Switch Function Remote Switch Function You can start fax reception by operation from the connected telephone set. This function is convenient for using this machine and a telephone set (commercially available product) in combination installed at places distant from each other. NOTE In order to use remote switch, it is necessary to connect the tone signal-sending telephone set (commercially available product) to the machine. However, even if it is a tone signalsending telephone set, this function may not be used satisfactorily depending on the type of telephone set. For details, contact our agent or the store where you purchased this machine. The remote switch dial is set to 55 at the factory. The remote switch dial number can be changed. Refer to Reception on page 9-7. Using the Remote Switch Dial To start fax reception by operation from the connected telephone set, use the following operation. 1 The connected telephone set makes a ringing tone. Lift the handset of the telephone. NOTE You can change the number of times the ringing tone rings. (Refer to Reception on page 9-7.) 2 Press the remote switch dial number (2 digits). When you hear the fax tone from the handset, enter the two-digit remote switch dial number using the dial button on the telephone set. The telephone line switches to the machine, and reception starts. 7-10