Kyocera FS-6525MFP Fax System (U) Operation Guide Rev-4.2012.3 - Page 186
Reception, Dialing ModeInch version, Retry Times, ECM TX, TX Start Speed, Media Type, Reduce RX Size
View all Kyocera FS-6525MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
Fax Settings > Default fax settings Item Dialing Mode(Inch version only) Retry Times ECM TX TX Start Speed Reception Item Media Type Reduce RX Size Reception Date/Time Duplex Description Select the telephone line according to the type you are contracted with. Please note that selecting a wrong telephone line will prevent you from sending fax. Value: Tone(DTMF), Pulse(10PPS) This item is included in the Quick Setup Wizard. Refer to Quick Setup Wizard (Fax Setup) on page 1-7. The number of retry times can be changed automatically. Value: 0 - 14 This item is included in the Quick Setup Wizard. Refer to Quick Setup Wizard (Fax Setup) on page 1-7. Set whether ECM TX is performed. ECM is a communication mode specified by the ITU-T (International Telecommunication Union) that retransmits data when an error occurs. Fax machines that have ECM mode check for errors as they communicate, preventing distortion of the image due to noise on the line and other conditions. Value: On, Off NOTE When there is a large amount of noise on the line, communication may take slightly longer than when [Off] is selected. Set the TX Start Speed. When communication conditions are bad, the fax may not be transmitted correctly. In that case, set a lower TX Start Speed. Value: 9600bps, 14400bps, 33600bps NOTE Normally this should be used with the default setting. Description Specify the paper type to be used for print output of the received fax. Value: All Media Types, Plain, Rough, Vellum, Recycled, Bond, Color, Thick, High Quality, Custom 1-8 Refer to Media Type for Print Output on page 5-10. When the reception size is larger than the paper size, you can reduce the print size. Value: On, Off Refer to Reduced Reception on page 5-9. Reception Date/Time function adds the reception date/time, sender information and number of pages on the top of each page when the message is printed out. It is useful for confirming the time of reception if the fax is from a different time zone. Value: On, Off For details, refer to Reception Date/Time on page 5-9. When received multiple pages of data are the same width, they can be printed out on both sides of paper having the same width as the data. Value: On, Off For details, refer to Duplex Print Output on page 5-9. 9-7