Kyocera FS-6525MFP Fax System (U) Operation Guide Rev-4.2012.3 - Page 43

Methods For Entering the Destination > Entering the destination fax number with the numeric keys Key Description On Hook Press [On Hook] to connect to the telephone line. When the FAX number has been entered, the machine starts dialing to the receiving system. After pressing this key, you can dial the number of the receiving system using the numeric keys. For details, refer to Manual Send on page 4-16. Sub Address To communicate using the sub address, press this key. For details, refer to Sub Address Transmission on page 6-23. Detail Settings TX Start Speed To change the transmission start speed, press this key. Select the speed from 33,600 bps, 14,400 bps, and 9,600 bps. NOTE Normally this should be used with the default setting. ECM ECM is a communication mode specified by the ITU-T (International Telecommunication Union) that retransmits data when an error occurs. Fax machines that have ECM mode check for errors as they communicate, preventing distortion of the image due to noise on the line and other conditions. Encrypted Transmission To send faxes using encryption, press this key. For details, refer to Encryption on page 6-36. 4 Press [OK]. Ready to send. FAX On Hook Sub Address 1234567890 Pause Space 10:10 Detail Settings Backspace GB0703_00 Menu Next Dest. Cancel OK Entry of the destination finishes. NOTE When On is selected in Entry Check for New Dest., a confirmation screen is displayed for the entered FAX number. Re-enter the same FAX number and press [OK]. For details, refer to Entry Check for New Dest. in the Operation Guide for the machine. Press [Next Dest.] to enter the next fax number. For details, refer to Broadcast Transmission on page 3-8. In addition to a fax, you can include e-mail transmission and folder (SMB/FTP) transmission to send as one job. For details, refer to the machine's Operation Guide. 3-3