Lexmark Monochrome Laser Complete Printer Reference (1.7 MB) - Page 102

Adjusting margin registration You can use the Left Margin Offset and Top Margin Offset settings in the Registration menu to adjust the margin settings for the paper trays. The range of valid settings for both the top and left margins is -50 to +50, where one unit represents 1 pel at 300 dpi (0.08467 mm or 0.00333 in.). Changing the Left Margin Offset setting lets you shift the position of the left margin to the left or right for any of the paper trays. You can choose from the following menu items: Tray 1 Left Margin, Tray 2 Left Margin, Tray 3 Left Margin, or Tray 4 Left Margin. A positive offset moves the margin to the right, and a negative offset moves the margin to the left. Use the Top Margin Offset setting to shift the position of the top margin in all trays up or down from -50 to +50. A positive offset moves text and graphics down the page, thus widening the top margin, and a negative offset moves text and graphics up, narrowing the top margin. To adjust the margin settings in a paper tray: 1 Make sure the printer is not busy processing a print job. 2 Turn the printer power off. 3 While pressing the Select and Return buttons on the operator panel, turn the printer on. When CONFIG MENU appears on the first line of the display, release the buttons. 4 Press Menu> until REGISTRATION appears on the second line. 5 Press Select. 6 Press Menu> to scroll through the list of margins you can change. 7 When the menu item for the margin you want to change appears on the display, press Select. 0*, the default adjustment value, appears on the display. 8 Press Menu> or