Lexmark Monochrome Laser Complete Printer Reference (1.7 MB) - Page 66
Technical Reference, Auto CR after LF
View all Lexmark Monochrome Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
PCL Emul Menu (continued) Menu item Tray Renumber (continued) Auto CR after LF Auto LF after CR * Factory default Printer setting The Tray Renumber menu item lets you configure your printer to work with printer drivers or applications that use different source assignments to request a given input source. Select Off to use the factory default paper source assignments. Select a numeric value (0...199) to assign a custom value to a paper source. Select None if you want the paper source to ignore the Select Paper Feed command. Select VIEW FACTORY DEF to view the factory default values assigned to each paper source. All sources are displayed in the VIEW FACTORY DEF menu, even if the printer does not support that source in any configuration. In the Restore Defaults menu item, select Yes to return all tray assignments to factory default values. See "Paper sources" on page 95 for information on available paper sources for your printer. Refer to the Technical Reference for more information about assigning source numbers. = Off* = On The Auto CR after LF setting determines whether the printer automatically performs a carriage return after a line feed control command. = Off* = On The Auto LF after CR setting determines whether the printer automatically performs a line feed after a carriage return control command. Changing printer settings 66