Lexmark Monochrome Laser Complete Printer Reference (1.7 MB) - Page 63

Setup Menu (continued) Menu item Printer setting Job Acct Limit Note: Job Acct Limit is only displayed when a hard disk option is installed, is neither defective, Read/Write nor Write protected, and Job Buffer Size is not set to 100%. = Disabled = 10...1000 (1000*) The Job Acct Limit menu item specifies the number of print jobs for which statistics are maintained on your printer hard disk. For example, if you set the limit to 10, the statistics from the 10 most recent print jobs are stored to disk. When the limit is reached, the oldest print job statistics are discarded and replaced with the statistics from the print job currently being printed. The number of jobs contained in the statistics data never exceeds the Job Accounting Limit. When Job Acct Limit is set to Disabled, print job statistics are stored for each print job until the hard disk is full. When the Job Accounting Limit is modified, all print job statistics currently stored on the hard disk are cleared. * Factory default PCL Emul Menu Use the PCL Emul Menu to change printer settings that only affect printed jobs using the PCL emulation printer language. PCL Emul Menu Menu item Font Source * Factory default Printer setting = Resident* = Download = Flash = Disk = All The Font Source setting determines which fonts appear in the Font Name menu. If a font source is not installed or does not contain any fonts, it is not listed as a value. Changing printer settings 63