Lexmark Monochrome Laser Complete Printer Reference (1.7 MB) - Page 45

Finishing Menu (continued) Menu item Printer setting Staple Prime Src Note: Staple Prime Src is only displayed when a finisher option is installed. = Tray 1* = Tray 2 = Tray 3 = Tray 4 When a staple cartridge is replaced or a staple jam is cleared, the printer must prime the stapler by stapling several staples into a sheet of paper. Use this setting to specify the paper source you want the printer to draw from when it is priming the stapler. Note: Only installed paper sources are displayed. Hole Punch Note: Hole Punch is only displayed when a finisher option is installed. = Off* = On Select On to punch holes in each print job sent to the printer. Note: Setting Hole Punch to On makes it the default for the printer. We recommend setting Hole Punch to Off and selecting Hole Punch from the printer driver. Offset Pages Note: Offset Pages is only displayed when a finisher option is installed. = None* = Between Copies = Between Jobs Use the Offset Pages setting to offset entire print jobs or copies of the same print job. Select Between Jobs to offset between separate print jobs. Select Between Copies to offset between copies of the same print job. * Factory default Changing printer settings 45