Lexmark Monochrome Laser Complete Printer Reference (1.7 MB) - Page 57

Setup Menu (continued) Menu item Printer setting Resource Save = Off* = On The Resource Save setting determines what the printer does with downloaded resources, such as fonts and macros, if it receives a job that requires more memory than is available. If Resource Save is set to On, the printer retains all permanent downloaded resources for all printer languages during language changes and printer resets. If the printer runs out of memory, 38 Memory Full appears on the operator panel display. If Resource Save is set to Off, the printer retains permanent downloaded resources only until memory is needed. Then it deletes those resources stored for the inactive printer language. Download Target Note: Download Target is only displayed when a formatted flash memory option or hard disk option is installed, is neither defective nor Read/ Write or Write protected, and if Job Buffer Size is not set to 100%. = RAM* = Flash = Disk The Download Target menu item specifies the storage location for downloaded resources, such as fonts and macros. (If neither a flash memory option or a hard disk option is installed, all downloaded resources are automatically stored in printer memory (RAM).) Storing downloaded resources in flash memory or hard disk is permanent storage rather than the temporary storage that RAM provides. You can add resources to flash memory or to the hard disk until the option is full. Use MarkVision to download resources to the printer. Note: If 51 Defective Flash or 61 Defective Disk appears when the printer is turned on, or during format and write operations, refer to the User's Reference for more information. * Factory default Changing printer settings 57