Lexmark Monochrome Laser Complete Printer Reference (1.7 MB) - Page 219
ABCDEF, Skewed print, Clipped images, From the Paper Menu, select, Paper Size., Select Tray 1 Size.
View all Lexmark Monochrome Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
Print quality problems (continued) Symptom Skewed print Clipped images AAAAA BBBBB CCCCC DDDDD EEEEE FFFFF Cause Solution The paper guides in the selected paper tray are not in the correct position for the size media loaded in the tray. Remove the paper in the tray and move the paper guides to the proper positions. Refer to the User's Reference for detailed instructions on adjusting the guides in each tray. Paper is not properly positioned under the corner bucklers. If you're feeding from a 500-sheet paper tray (tray 2 or tray 3, or an optional tray 4), make sure the stack of paper fits under the corner bucklers before pushing the tray into the printer. Refer to the User's Reference for detailed instruction on loading media in the paper trays. The paper tray is not completely inserted into the printer. Push the tray firmly into the printer to make sure it is fully inserted. Paper feed rollers are dirty or Call for service. worn. The paper tray is not completely inserted into the printer. Push the tray firmly into the printer to make sure it is fully installed. The left paper guide in the 500-sheet tray is set for a different size paper than what is loaded in the tray. Insert the paper guide in the correct position for the size paper in the tray. Refer to the User's Reference for information on loading paper. You did not set the correct paper size for tray 1. After loading paper in tray 1, set the default paper size from the printer operator panel: 1 From the Paper Menu, select Paper Size. 2 Select Tray 1 Size. 3 Select the correct paper size from the list of available values. For information on using the operator panel, see page 28. Troubleshooting 219