Lexmark Monochrome Laser Complete Printer Reference (1.7 MB) - Page 206
Compatibility, Direct network attachment, Direct twinaxial attachment
View all Lexmark Monochrome Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
Compatibility Direct network attachment When the printer contains an optional SIMM for IPDS, it attaches to a network using one of the following MarkNet print servers: • MarkNet N2000 Series (Any microcode level is supported for the MarkNet N2000.) • MarkNet S (Microcode level 1.6.5 or later is required.) • MarkNet Pro (Microcode level 2.9.15 or later is required.) The IBM host software requirements for AFP/IPDS printing when the printer is emulating an IBM 381x, 43xx, 311x, or 4028 printer are: • Print Services Facility (PSF)/MVS version 2.2 or later • Application System (AS)/400 Operating System (OS)/400 V3R2, V3R1, V3R6, V3R7, V4R1, V4R2, V4R3 or later through PSF/400 Note: With AS/400 OS/400 V3R1 or OS/400 V3R6, to print IPDS over TCP/IP through PSF/400, PTF SF29249 - WRKAFP2 is required. • PSF for OS/2 (PSF/2) 2.0 or later • PSF for AIX (PSF/6000) 2.1 or later Direct twinaxial attachment When the printer contains an optional SIMM for IPDS and the Coax/Twinax Adapter for SCS with a twinaxial cable, the printer attaches to the following IBM hardware: • AS/400e servers and e-systems • AS/400 Twinaxial Workstation Controllers • AS/400 Advanced System/36 Twinaxial Workstation Controller • 5494 Remote Control Unit • 5394 Remote Control Unit Note: Two separate twinax addresses, one for the SCS adapter and another for the SIMM for IPDS, are required. Connectivity and network management 206