Lexmark Monochrome Laser Complete Printer Reference (1.7 MB) - Page 92

Configuration Menu Use the Configuration Menu to change printer operation settings. You can access this menu by pressing the Select and Return buttons when you turn on the printer. Configuration Menu Menu item Maint Counters Registration Prt Quality Pgs Panel Menus * Factory default Printer setting = Reset Hole Punch = Reset Fuser = Reset Transfer When you empty the hole punch box on the optional finisher, replace the fuser, or install the transfer kit, you must reset the printer's internal page counter. Press Select to initiate the reset operation for the appropriate counter. Refer to the User's Reference for more information about resetting the printer's internal counter. Top Margin = -50 - 50 (0*) Tray x Left Mar = -50 - 50 (0*) Use the Registration menu item to adjust the registration for the top margin on all the paper trays at one time, and adjust the left margin for any individual paper tray. One unit of measure represents 1/300 of an inch, providing a range slightly greater than +\- 4 mm. Select the margin you want to adjust, scroll through the range of values for that margin, and then press Select. The value becomes the current setting and the printer prints a test page with the new setting. Press Select to print the quality test pages. The first page contains a combination of graphics and text. The remaining pages contain graphics only. Note: Make sure Paper Size in the Paper Menu is set to Letter, Legal, or A4. = Disable = Enable* Select Disable to lock the operator panel menus. Select Enable to unlock the operator panel menus. See "Disabling operator panel menus" on page 31 for more information. Changing printer settings 92