Lexmark Monochrome Laser Complete Printer Reference (1.7 MB) - Page 71
Serial Menu, Parallel Menu continued
View all Lexmark Monochrome Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Parallel Menu (continued) Menu item Parallel Mode 1 Parallel Mode 2 * Factory default Printer setting = Off* = On The Parallel Mode 1 setting controls the pull up resistors on the parallel port signals. It is useful for personal computers that have open collector outputs on the parallel port signals. Set Parallel Mode 1 to On to disable the resistors or to Off to enable the resistors. = Off = On* The Parallel Mode 2 setting determines whether the parallel port data is sampled on the leading or trailing edge of strobe. If Parallel Mode 2 is set to On, the parallel port data is sampled on the leading edge of strobe. If Parallel Mode 2 is set to Off, the parallel port data is sampled on the trailing edge of strobe. Serial Menu Use the Serial Menu to change settings affecting jobs sent to the printer through the serial interface port. The Serial Menu is only displayed when a serial interface port is installed in the printer. You must first select Serial Opt x before selecting from the following menu items. Serial Menu Menu item PCL SmartSwitch * Factory default Printer setting = Off = On* If PCL SmartSwitch is set to On, the printer examines the data on the serial interface connection and selects PCL emulation if the data indicates that is the printer language. If both PCL SmartSwitch and PS SmartSwitch are set to Off, the printer uses the language specified in the Printer Language menu as the default. If only one SmartSwitch setting is set to On, the printer uses that language as the default. Changing printer settings 71