Lexmark Monochrome Laser Complete Printer Reference (1.7 MB) - Page 230
Finisher problems continued, Prime the stapler.
View all Lexmark Monochrome Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
Finisher problems (continued) Symptom The finisher does not offset the print job as requested. Pages are not stapled. Cause You've selected both offsetting and stapling for the job. The stapler is not installed or is not installed correctly. The stapler is out of staples. The stapler is jammed. The stapler is not primed. Staples are not properly positioned in the stapler. You are trying to staple too many sheets. Solution The finisher cannot staple and offset a print job. If both functions are selected, the printer staples the job, but does not offset it. Reinstall the stapler. Refer to the User's Reference for instructions on removing and installing the stapler. Insert a new staple cartridge. Refer to the User's Reference for instructions on installing a new staple cartridge. Check the stapler for a staple jam. Refer to the User's Reference for information on clearing a staple jam. Prime the stapler. Refer to the User's Reference for information on priming the stapler. Prime the stapler. Refer to the User's Reference for information on priming the stapler. The finisher can staple up to 50 sheets of 20 lb paper. If you attempt to staple a larger stack of paper, the finisher ejects the stack without stapling it. Reduce the number of pages in the staple job. Troubleshooting 230