Lexmark Monochrome Laser Complete Printer Reference (1.7 MB) - Page 178

Formatting devices Formatting flash memory or disk erases all information currently stored on the device and prepares the device to receive new resources. The files are not recoverable. The printer displays a message on the operator panel if a device requires formatting before you can download resources. Memory errors The following error messages may appear if the printer does not have enough memory to process a print job or complete other printer functions. Memory error messages Message 35 Res Save Off Deficient Memory 37 Insufficient Collation Area 37 Insufficient Defrag Memory Explanation The printer lacks the memory needed to enable Resource Save. This message usually indicates too much memory is allocated for one or more of the printer link buffers. • Press Go to disable Resource Save and continue printing. • To enable Resource Save after you get this message: - Make sure the link buffer is set to Auto, and exit the menus to activate the link buffer changes. When Ready is displayed, enable Resource Save from the Setup Menu. - Install additional memory. The printer memory (or optional disk, if installed) does not have the space necessary to collate the print job. • Press Go to print the portion of the job already stored and begin collating the rest of the job. • Cancel the current job. Press Menu> or or