Lexmark Monochrome Laser Complete Printer Reference (1.7 MB) - Page 89

Fax Menu (continued) Menu item Printer setting Fax Parity = Even = Odd = None* = Ignore This setting lets you select the parity for fax data frames. Refer to the Technical Reference for more information about parity. Fax Buffer = Disabled = Auto* = 105K to maximum size allowed You can configure the size of the fax buffer to meet the requirements of your system. If the limited size of the input buffer is preventing you from receiving fax data, you may want to increase the fax buffer size. The maximum size depends on the amount of memory in your printer, the size of the other link buffers, and whether the Resource Save setting is set to On or Off. To maximize the range for the Fax Buffer size, you can disable or reduce the size of the parallel, network, infrared, LocalTalk, and USB buffers. Choose Auto to let the printer calculate a buffer size proportional to the total amount of available printer memory. In most cases, Auto is the recommended setting. Note: Changing the Fax Buffer setting automatically resets the printer. Job Buffering Note: Job Buffering is only displayed when a hard disk option is installed, is neither defective nor Read/Write or Write protected, and when Job Buffer Size is not set to Disabled. = Off* = On Job Buffering temporarily stores jobs on a hard disk option before being printed, usually freeing the host computer while the job prints. If 61 Defective Disk appears when the printer is turned on, or during disk format and write operations, refer to the User's Reference for more information. If Job Buffering is set to On, print jobs are buffered to the hard disk option. If Job Buffering is set to Off, print jobs are not buffered. Note: Changing the Job Buffering setting automatically resets the printer. * Factory default Changing printer settings 89