Lexmark Monochrome Laser Complete Printer Reference (1.7 MB) - Page 86
USB Menu continued
View all Lexmark Monochrome Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
USB Menu (continued) Menu item PS SmartSwitch NPA Mode * Factory default Printer setting = Off = On* If PS SmartSwitch is set to On, the printer examines the data on the specified USB interface connection and selects PostScript emulation if the data indicates that is the printer language. If both PCL SmartSwitch and PS SmartSwitch are set to Off, the printer uses the language specified in the Printer Language menu as the default. If only one SmartSwitch setting is set to On, the printer uses that language as the default. = On = Off = Auto* NPA is a mode of bidirectional communication that follows the conventions defined in Network Printing Alliance Protocol, a Printer/Host Control Specification developed by the NPA. NPA mode requires special processing of the print data. If NPA Mode is set to On, the data received must be in NPA format. If not, it is rejected as bad data. If NPA Mode is set to Off, the printer does not perform any NPA processing. If NPA Mode is set to Auto, the printer examines the data to determine the format and then processes it in either format. The NPA Mode setting in the USB Menu applies only to the USB interface connection. Note: Changing the NPA Mode setting automatically resets the printer. Changing printer settings 86