Lexmark Monochrome Laser Complete Printer Reference (1.7 MB) - Page 220

Print quality problems (continued) Symptom Incorrect margins Cause The paper tray is not completely inserted into the printer. The left paper guide in the 500-sheet tray is set for a different size paper than what is loaded in the tray. You did not set the correct paper size for tray 1. The locking clips are not securing the drawer to the printer. The margin settings for the selected tray need to be adjusted. The paper feed rollers are worn. Solution Push the tray firmly into the printer to make sure it is fully installed. Insert the paper guide in the correct position for the size paper in the tray. Refer to the User's Reference for information on loading the 500-sheet drawer. After loading paper in tray 1, set the default paper size from the printer operator panel: 1 From the Paper Menu, select Paper Size. 2 Select Tray 1 Size. 3 Select the correct paper size from the list of available values. For information on using the operator panel, see page 28. Attach the four locking clips to the drawer. Refer to the Setup Guide for installation instructions. Adjust the appropriate margin settings in the Registration Menu. Call for service. Paper feed problems If paper has trouble traveling through the printer, paper jams or other problems relating to mechanical paper feed can result. Use the table beginning on page 221 to find solutions to paper feed problems you are experiencing. For information about paper feed problems in the optional finisher, see page 229. See page 233 for information about paper feed problems in the optional mailbox. For detailed Troubleshooting 220