Lexmark Monochrome Laser Complete Printer Reference (1.7 MB) - Page 164
Managing memory, Printer memory (SDRAM
View all Lexmark Monochrome Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
8 Managing memory On the Optra W810, the memory required to print a particular job is a complex function of the types of memory available, the printer settings selected, and the composition of the print job itself. The amount of printer memory installed and the attributes of the processor also affect print speed and performance. Printer memory (SDRAM) Printer memory (SDRAM) for the Optra W810 is available in dual inline memory modules (DIMMs). The printer ships with either 16MB (soldered on the system board) or 32MB (16MB soldered on the system board and 16MB installed in one of the memory connectors) of standard memory, depending on the printer model. To install the maximum memory supported (384MB), you must install a 128MB DIMM in each of the three memory connectors on the system board. Refer to the Setup Guide for instructions on installing memory. Optra W810 memory specifications Memory Standard memory Memory type Additional memory connectors Optional memory Optra W810 16MB SDRAM 3 4MB, 8MB, 16MB, 32MB, 64MB, 128MB Optra W810n 16MB SDRAM 3 4MB, 8MB, 16MB, 32MB, 64MB, 128MB Optra W810dn 32MB SDRAM 2 Note: A 16MB DIMM is installed in one of the three connectors. 4MB, 8MB, 16MB, 32MB, 64MB, 128MB Managing memory 164