Lexmark Monochrome Laser Complete Printer Reference (1.7 MB) - Page 48

Utilities Menu (continued) Menu item Printer setting Format Disk Note: Format Disk is only displayed when a hard disk option is installed, is neither defective nor Read/Write or Write protected, and Job Buffer Size is not set to 100%. = Yes = No Formatting the hard disk option deletes all resources stored on the hard disk and prepares it to receive new resources. If you select Format Disk and press Go, any data stored on the hard disk option is lost. Do not turn off the printer while the hard disk is formatting. Job Acct Stat Note: Job Acct Stat is only displayed when a hard disk option is installed, is neither defective nor Read/Write or Write protected, and Job Accounting in the Setup Menu is set to On. = Print = Clear Select Print to print a list of statistics for a defined number of the most recent print jobs. (The number of jobs is determined by the value of the Job Acct Limit menu item in the Setup Menu). The statistics include whether the job printed with or without errors, the time required to print the job, the size (in bytes) of the job, the requested paper size and paper type, the total number of printed pages, and the number of copies requested. Select Clear to delete all accumulated job statistics from the hard disk option. Clearing Job Accounting Stat is displayed until the process completes. See "Tracking job statistics" on page 170 for more information. Hex Trace Press Select to enter Hex Trace mode. Hex Trace helps isolate the source of a print job problem. With Hex Trace selected, all data sent to the printer is printed in hexadecimal and character representation. Control codes are not run. To exit Hex Trace, turn the printer off or reset the printer. To reset the printer, press Menu> or or