Lexmark Monochrome Laser Complete Printer Reference (1.7 MB) - Page 231

Finisher problems (continued) Symptom Staple priming fails. The staple is in the wrong corner of the stack. Cause Solution The stapler is out of staples. Insert a new staple cartridge. Refer to the User's Reference for instructions on installing a new staple cartridge. The staple priming source tray is empty. Load paper in the staple priming source tray specified in the Finishing Menu. Bin 2 is full. Remove the stack of paper from bin 2. The stapler is not installed or is not installed correctly. Reinstall the stapler. Refer to the User's Reference for instructions on removing and installing the stapler. The stapler is jammed. Check the stapler for a staple jam. Refer to the User's Reference for detailed instructions on clearing a staple jam. The stapler has a fixed position in the finisher, which determines the placement of the staple. You cannot change the position of the staple. If necessary, reformat your print job from the software application or rotate your print job using the printer driver to avoid stapled sets that are difficult to read. A4, A5, B5, executive, and letter Portrait Landscape ABC ABC A3, B4, legal, and 11x17 Portrait Landscape ABC ABC Troubleshooting 231