Lexmark Monochrome Laser Complete Printer Reference (1.7 MB) - Page 74
uration is set to RS-422. Select Serial Menu, SERIAL, OPTION 1, RS-232/RS-422, and RS-422. - printer definition
View all Lexmark Monochrome Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Serial Menu (continued) Menu item RS-422 Polarity Serial Protocol Robust XON Baud * Factory default Printer setting = Normal* = Reverse Select Reverse polarity to swap the polarity (the definition of one and zero). This setting is only available if the serial communication configuration is set to RS-422. Select Serial Menu, SERIAL OPTION 1, RS-232/RS-422, and RS-422. = DTR* (hardware handshaking) = DTR/DSR (hardware handshaking) = XON/XOFF (software handshaking) = XON/XOFF/DTR (combined handshaking) = XONXOFF/DTRDSR (combined handshaking) The printer supports hardware handshaking, software handshaking, and combined hardware and software handshaking as indicated in the list of values for this menu item. Refer to the Technical Reference for more information about the serial interface. = Off* = On Robust XON only applies to the serial port if Serial Protocol is set to XON/XOFF. When Robust XON is set to On, the printer sends a continuous stream of XONs to the host computer to indicate that the serial port is ready to receive more data. = 1200 = 2400 = 4800 = 9600* = 19200 = 38400 = 57600 = 115200 This setting lets you specify the rate at which data is being sent to or from your computer. Refer to the Technical Reference for information about the range of baud values. Changing printer settings 74