Maytag MAH5500BWW Service Manual - Page 11
Washer Controls - neptune
View all Maytag MAH5500BWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
WASHER CONTROLS The control system in the Neptune horizontal axis washer generally consists of a timer and microprocessor-based machine control. These receive input signals and send output signals to other equipment in the washer, including the motor and motor control, user input switches, user indicator lights, the door latch and lock assembly, water valves, drain pump, unbalance switches, dispenser actuator wax motors, a pressure switch, and a tub light. The machine control has direct control of these items: - Motor speed and direction, through signals to the motor control. - Door lock wax motor. - Hot and cold water valves, with an input signal from the timer and pressure switch. - Timer motor. - On Light. In general, the timer dial is rotated to a desired setting, selects the cycles options using the option switches, and starts the washer. The machine control reads the inputs from the timer, option switches and pressure switch then send output signals to the motor control and other components based upon those inputs. When the machine control has completed its set of instructions for the specific timer setting, it energizes the timer motor output to advance the timer to the next increment, reads a new set of input signals from the timer, and acts upon them. This continues until the cycle is complete. (See Figure 1-7 & 1-8 for a generic representation of the Neptune washer control system.) Figure 1-7 16008373-01 Prior To Series 17 © 1998 Maytag Corporation SECTION 1. GENERAL INFORMATION 1-5