Maytag MAH5500BWW Service Manual - Page 123
Led Washer - diagnostics
View all Maytag MAH5500BWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
NOTE: Due to the various differences in the two washer control systems, the following pages will focus first on the LED washer then the LCD washer. The Help and Diagnostic code lists are stored in separate permanent memories with a maximum of nine codes per list. LED WASHER: Accessing Service Mode: Pressing down the delicates and heavy soil keys for 3 seconds places the machine in the service mode. SPECIAL TESTS The following table lists the various tests available while in the Service Mode, which can be accessed by pressing the following keys: SERVICE MODE TABLE LED Washer: Press Keys Normal Wrinkle Free Quick Spin Light Soil Delicates Rinse Stain Cycle Presoak Hand Wash Special Test/Function Shows Motor Torque Membrane Pad Check Fast Time Down Test Quick Spin Test Displays Software Revision Number Quick Service Cycle Board Output Test Help Codes Diagnostic Codes Board Input Tests Membrane Pad Check While in service mode, pressing the wrinkle free key will start a membrane pad switch check. The membrane check involves turning all the embedded LED on the membrane pad off except for the wrinkle free key. All the LEDs can be toggled by pressing the key associated with the LED. At any point, if there are 5 seconds of inactivity, then this test will exit without any display. The off key must be pressed twice within 30 seconds in order to cancel this test. FAST TIME DOWN TEST While in service mode, the pressing of quick key will advance the program to the next portion of the wash cycle. (Refer to page 1-2) QUICK SPIN TEST While in service mode, the pressing of spin key shall start the washer in the quick spin mode. 16010486 (16008373-05) Revised 02/01 Section 2. Washer Controls Overview ©2001 Maytag Appliances Sales Company 2-11