Maytag MAH5500BWW Service Manual - Page 91

A new Stain Cycle and revised tumble patterns were introduced and will be described in the following pages. At series 11 the timer was changed, wire harness revised and the schematic was changed. The timer cams were changed in the timer, the wire harness changed to pull wires out of the timer connector and the pump is now in series with the pressure switch, also an extra wire was jumpered across the pressure switch. Now the recirculating pump is controlled through the pressure switch (Figure 4-2). This was done to force the washer to fill with water prior to starting the recirculation pump. SECTION 5. CYCLE REVIEW Figure 5-1 Cycles on the Fabrics switch now list the cycles according to how clothes are sorted. This simiplifies how to select the cycles in doing the wash. A new Stain Cycle was added to the Option Switch which adds cycle wash time, various tumble patterns and an additional rinse with longer tumble times during the rinse. (See Figure 5-1) 16010199 (16008373-03) 4 Revised 7/00 ©2000 Maytag Appliances Sales Company