Panasonic VDR M50 Dvd Camcorder - Page 152
Error Messages - error 2881
UPC - 037988251209
View all Panasonic VDR M50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Error Messages A message may appear while you are operating the DVD Video Camera. If a message appears, refer to the following table and take appropriate corrective action. Messages are arranged in alphabetical order. Message Cause & Troubleshooting (1) Data error in a part of image file. Repair data now? (2) Found error in image file. Repair data now? (3) Data error in all image file. Repair all data now? It is possible that the system cannot normally complete writing of file when, for example, power is turned off for some reason during recording or editing (deleting, dividing or combining scenes, or creating play list). Selecting "YES" will automatically repair the video file, but even if "NO" is selected, the same message will appear when the DVD Video Camera is turned on next time. (Do not remove the disc while the DVD Video Camera is recognizing it: Ignoring this will deactivate the file repair function.) Follow the instructions on screen, taking note of the following cautions: • Data may not be repaired, depending on the timing when power was turned off. • Data may not be repaired normally if data recorded on another recorder is mixed in. • The repaired data may be different from the original recorded content because of partial deletion of defective portion. • Since the date/time of repair is added to the repaired data (only the corrected portion for partial repair), the original date/time information will be lost. • Since all movies, and then all stills, are repaired, the order of recorded contents will be lost. (In case of message (2) (3) only) • See *1 on page 157. (1) Error has occurred. • Error has occurred. Try to restart the DVD Video Camera using Please restart. the following methods: (2) Error has occurred. Please reinsert a disc. (1) Turn power off, remove the battery pack or AC adaptor and reattach it, and then turn power on again. (2) Turn power off, and reinsert the disc. Then turn power on again. (3) Error has occurred. (3) See *3 on page 157. Error code No. xxxx. (4) If you have another disc available, check to see if any problem Please read the manual. occurs with the disc. If another disc can be used normally, the (4) ERROR xxxx original disc may be defective: Contact the disc manufacturer. If the above procedures cannot solve the problem, take note of (5) DISK xxxx the error number, and contact your dealer. Reference: "Error Code 2881" shows that the disc cannot be recognized properly. (1) This disc must be DVD-R disc that was not initialized for camera use was inserted. formatted before it can be used by this camera. (2) Do not format this disc if you want to record from the PC connection terminal. (3) Format the disc now? Battery pack is almost Replace with a charged battery, or use AC adaptor to power the empty. Replace it. DVD Video Camera. Cannot combine scene. Unless consecutive scenes are selected, they cannot be combined. Reference page 9, 42, 45, 46 47 42, 45 106 152