Panasonic VDR M50 Dvd Camcorder - Page 83

Using the Electronic Image Stabilizer (EIS) When you use zoom to record a magnified subject image, it will correct fuzziness in the recorded image. 1 Press the MENU button, choose "EIS" on the "Camera Functions Setup" menu screen, and then press the A button. 2 Choose "On" or "Off", and then press the A button. Came ra Func t i ons Set u p P r o g r am AE Wh i t e Ba l . EIS On Di g . Zoom Of f Wi nd Cut Wide ENTER RETURN RAM 3 Press the MENU button to end setting. lChecking whether EIS is On or Off You can check whether EIS is On or Off by the on-screen information display. EIS 0:00:00 REM 3 0 MIN 8 : 00AM FINE SEP 30 2 00 4 After recording with EIS set to "Off", it is recommended that you return the setting to "On" and then turn the DVD Video Camera off, unless you normally record with EIS "Off" setting. Note: • The EIS setting will be stored in memory even when the DVD Video Camera is turned off. • It is recommended that you specify "EIS: Off" when using the DVD Video Camera on a desk or tripod. • When "EIS: On" is specified, there will be a slight difference between the actual movement and the movement on screen. • Gross camera shake may not be entirely corrected even if "EIS: On" is specified. Firmly hold the DVD Video Camera with both hands. • EIS may not operate correctly when the tele or wide- conversion lens (optional-user provided) is used. • When you record pictures with setting 10x or more of magnification and turning the EIS to "ON" in dim places, after-images may stand out. In this case, we recommend using a tripod with turning the EIS to "OFF" (only for VDRM50PP). • The EIS function cannot be used when still images are recorded on the card (only for VDR-M70PP). Reducing Wind Noise during Recording (Wind Cut) When recording sound from the microphone built into this DVD Video Camera, you can reduce wind noise in recording. If "Wind Cut: ON" is specified, the low-frequency components in the sound picked up by microphone will be cut off during recording: This makes it easier to hear the target voice or sound during playback. 1 Press the MENU button, choose "Wind Cut" on the Camer a F u nc t i on s S e t u p P r o g r am AE "Camera Functions Setup" menu screen, and then press the A button. Wh i t e Ba l . EIS D i g . Zoom Wi nd Cut On Wide Of f ENTER RETURN RAM 2 Choose the desired option, and then press the A button. 3 Press the MENU button to end setting. 0:00:00 REM 3 0 MIN Note: • You can also use the on-screen display to confirm that Wind Cut has been set. • The Wind Cut setting will be stored in memory even when the DVD Video Camera is turned off. • The Wind Cut function will work only during movie recording. • The Wind Cut function works only with the built-in microphone: It will not function when using an external microphone (P. 68). 8 : 0 0AM FINE SEP 30 2004 Wind cut icon 83