Panasonic VDR M50 Dvd Camcorder - Page 154

Message Cause & Troubleshooting Control Information Error. Mismatch may occur between the recorded image and scene information. Update the control information. • Use another disc. • See *3 on page 157. COPY PROTECTED The video signal input to this DVD Video Camera may be copyguarded. Some prerecorded video materials, such as movies, are guarded against copying. Copy-guarded materials cannot be recorded on this DVD Video Camera. DISC ACCESS The recorded scene is being stored on disc. Wait until the message disappears, and you can start to use the DVD Video Camera. This DVD Video Camera is verifying whether the correct disc has been inserted. Wait until the message disappears, and you can start to use the DVD Video Camera. This message will be displayed for a little longer when the date changes. DISC ALMOST FULL The disc will soon be full, and recording will be impossible. Delete unnecessary scenes and try the disc again, or use another disc. Disc error has occurred. • Disc error occurred during finalizing, and finalizing failed. Finalizing is not Replace the disc. complete. • See *3 on 157 Disc error has occurred. Format the disc now? • Has the disc been initialized on PC? Has initializing the disc on PC been interrupted? Choose "YES" and initialize the disc when using it on this DVD Video Camera. Initializing the disc will erase all data on it. • See *2 on page 157. Disc error has occurred. Formatting is not complete. The disc may be dirty. Remove the disc and wipe off fingerprints, dust, etc. before reusing it, or use another disc. This message may also appear if you insert a disc for which formatting was interrupted midway. In this case, use another disc. Disc error has occurred. Keep disc inside & restart. Disc error could have occurred during editing of scenes. Turn off the DVD Video Camera with the disc being used in it, connect AC adaptor, and then power the DVD Video Camera again. Repair of scenes will be tried. Disc error. • Use another disc. • See *3 on page 157. • Mismatch in recording information may be caused by editing done on some device other than this DVD Video Camera. Initialize the disc or use another disc. • Initializing the disc will erase all data on it. "DISC ERROR" appears when an attempt to release write-protect is made. If you have write-protected a disc using the write-protect setting tool (WPTOOL) that is equipped with the DVD-RAM driver contained on the CD-ROM provided with this DVD Video Camera, you cannot release the write-protect on this DVD Video Camera as is. Use the write-protect setting tool on PC to release the write-protect. Reference page 126 28, 74 75 51, 52  32, 33,101 127 125 74, 125 45 28, 74 125  154