Ricoh 3245 General Settings Guide - Page 123

BLoading Paper BLoading Paper Important ❒ Tray 1 and LCT use A4 Kpaper exclusively. Load only A4 paper at all times. ❒ If you want to load Letter- sized paper (8 1/2" × 11"K) paper in Tray 1 or LCT, contact your sales or service representative. A Pull out the paper tray until it stops. Reference For paper types and sizes, see ZJKY270J p.171 "Copy Paper". To load paper in the bypass tray, Note see "Copying from the Bypass Tray", Copy Reference. ❒ You can change the paper size, see p.126 "Changing the Paper 5 Note ❒ Fan the paper before loading. Size". B Load paper into the tray with the ❒ Straighten curled or warped paper print side down. before loading. Loading Paper into Paper Trays and Paper Tray Unit Tray 1 uses only A4Kpaper. If you want to load 8 1/2" × 11"K, contact your sales or service representative. The position of the side and end guides can be changed in tray 2, 1 tray paper unit, and 2 tray paper unit. Paper of various sizes can then be loaded in them. This section describes loading paper in tray 2. ZAJDKLY022970SJ Important ❒ Do not stack paper over the lim- it mark. C Push in the paper tray slowly un- til it stops. If a tray is pushed forcefully, the position of its side guide may shift. If you load a paper size that is not selected automatically, you will need to specify the paper size with the control panel. 111