Ricoh 3245 General Settings Guide - Page 69

Settings You Can Change with User Tools ❖ The paper sizes you can set for trays are as follows: • Auto Detect, A3L, B4 JISL, A4K, A4L, A5K • 11"×17"L, 81/2"×14"L, 81/2"×11"K, 81/2"×11"L, 8"×13"L, 81/2"×13"L, 81/4"×13"L, 71/4"×101/2"L Important ❒ If the specified paper size differs from the actual size of the paper loaded in the paper tray, a misfeed might occur because the correct paper size was not detected. Note ❒ The paper guide for the optional LCT is fixed for A4K, 81/2"×11"K size paper. Contact your service representative if you need to change the paper size. ❒ Default: 4 • Tray 2: Auto Detect • Tray 3: Auto Detect • Tray 4: Auto Detect Reference p.126 "Changing the Paper Size" ❖ Paper Type: Bypass tray Sets the display so you can see what type of paper is loaded in the bypass tray. ❖ The paper types you can set for the bypass tray are as follows: • No Display, Recycled Paper, Special Paper, Colour Paper, Letterhead, Preprinted Paper, Thick Paper, OHP, Plain: Dup.Back, Thick: Dup.Back Note ❒ Default: No Display ❖ Paper Type: Tray 1-4 Sets the display so you can see what type of paper is loaded in each paper tray. The print function uses this information to automatically select the paper tray. ❖ The paper types you can set for trays are as follows: • No Display, Recycled Paper, Special Paper, Colour Paper, Letterhead, Preprinted Paper Note ❒ Default: • Paper Type: No Display • Copying Method in Duplex: 2 Sided Copy • Apply Auto Paper Select: Yes 57