Ricoh 3245 General Settings Guide - Page 55

Using the Document Server B If you need to change print set- tings, press [Print Settings]. The Print Settings display appears. User names, file names, and print order of documents appear. Note ❒ Print settings made for printing in copier or printer function remain after printing and applied to the next job. Print settings made in facsimile mode, however, do not remain. ❒ If you select multiple documents, the print settings will remain applied to the first document, but not to other documents. ❒ Print setting items are listed below. For details about print results of each setting, see Copy Reference. ❖ Binding format • 2 Sided Copy Top to Top • 2 Sided Copy Top to Bottom • Magazine • Book ❖ Cover handling • Cover/Slip Sheet • Edit/Stamp ❖ Finish • Sort • Rotate Sort • Stack • Staple • Punch ❒ If you print more than one set using the Sort function, you can check the print result by printing out only the first set. See p.44 "Sample copy". ❒ When multiple documents are printed at the same time, you can combine them into a single set by adjusting the print order. ❒ When multiple documents are printed at the same time, print settings made for the document 3 printed first are applied to all other documents. ❒ If you select multiple files, you can check file names or print order selected in step A by scrolling the list using [T] and [U]. ❒ Press [Select File] to return to the Select Files to Print display. ❒ The preset stamp function is not available for documents stored in facsimile mode. C Enter the required number of prints using the number keys Note ❒ Up to 999 can be entered. D Press the {Start} key. Printing starts. To stop printing A Press the {Clear/Stop} key. B Press [Stop]. 43