Ricoh 3245 General Settings Guide - Page 71

Settings You Can Change with User Tools ❖ Printer Bypass Paper Size You can specify the size of the paper in the bypass tray when printing data from the computer. • The paper types you can set for trays are as follows: A3L, A4K, A4L, A5K, A5L, A6L, B4 JISL, B5 JISK, B5 JISL, B6 JISL, C5 EnvK, C6 EnvK, DL EnvK, 12 × 18L, 11 × 17L, 81/2 × 14L, 81/2 × 13L, 81/2 × 11K, 81/2 × 11L, 81/4 × 13L, 8 × 13L, 71/4 × 101/2K, 71/4 × 101/2L, 51/2 × 81/2L, 41/8 × 91/2K, 37/8 × 71/2K, 8KL, 16KK, 16KL Note ❒ Default:A4K ❒ You can specify a custom size of between 100.0 and 139.7 mm (4.0"-5.5") vertically, and between 457.2 and 600.0 mm (18.0"-23.7) horizontally. 4 Timer Settings ❖ Auto Off Timer After a specified time has elapsed following job completion, the machine automatically turns off in order to conserve energy. This function is called "Auto Off". The machine status after the Auto Off operation is referred to as "Sleep mode". For the Auto Off Timer, specify the time to elapse before Auto Off. Note ❒ Default: 45 minute(s) for Type 1, 60 minute(s) for Types 2 and 3 ❒ Enter a time interval between 10 seconds and 240 minutes, using the number keys ❒ From "Sleep mode", the machine is ready to use within 101 seconds. ❒ Auto Off may not work when error messages appear. ❖ Energy Saver Timer Set the amount of time the machine waits before switching to lower-power mode after copying has finished or the last operation is performed. The time can be set from 1 minute to 240 minutes using the number keys. Note ❒ Default: 15 minute(s) ❖ Panel Off Timer Set the amount of time the machine waits before switching the panel off after copying has finished or the last operation is performed. Note ❒ The warm up time for making a copy from standby mode is 3 seconds for Panel off Level 1 and 15 seconds for Panel off Level 2. ❒ Default: 1 minute(s) ❒ Enter a time interval between 10 seconds and 240 minutes, using the number keys. 59