Ricoh Aficio MP 2000 Network Guide - Page 100
Interface interface name: Duplicate IP Ad, Established SPX Connection with PServ
View all Ricoh Aficio MP 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Monitoring and Configuring the Printer 2 92 Message DHCP server not found. dhcpcd start. Duplicate IP=(from). Established SPX Connection with PServer,(RPSocket=, connID=) exiting Exit pserver Frametype = httpd start. IEEE 802.11b mode inetd start. Interface (interface name): Duplicate IP Address (IP address). < Interface > started with IP: < IP address > < Interface >: Subnet overlap. IPP cancel-job: permission denied. ipp disable. ipp enable. IPP job canceled. jobid=%d. LeaseTime=(sec), RenewTime=(sec). Login to fileserver (,) Memory allocate error. Problem and solutions The DHCP server was not found. Make sure that the DHCP is on the network. The DHCPCD service (dhcp client service) has started. The same IP address (IPv,or IPv6 address) was used. Each IP address (IPv, or IPv6 address) must be unique. Check the address of the device indicated in [MAC address]. (In the remote printer mode) Connection to the print server has been established. The lpd service has ended and the system is exiting the process. (In the print server mode) The print server function is disabled because the necessary print server settings have not been made. The frame type name is configured to be used on NetWare. The httpd service has started. Displays IEEE 802.11b communication mode. The inetd service has started. The same IP (IPv4 or IPv6) address was used. Each IP address must be unique. Check the address of the device indicated in [IP address]. IP address (IPv4, or IPv4 address) has been set for the interface and is operating.. The same IP address (IPv, orIPv6 address) and the subnet mask is used with other device. The printer could not authenticate the name of the user attempting to cancel a job. Printing with ipp is disabled. Printing with ipp is enabled. The spooled job was canceled due to error or user request. The resource lease time received from the DHCP server is displayed in [lease time] in seconds. The renewal time is displayed in [renew time] in seconds. (In the print server mode) Login to the file server is in the NDS or BINDERY mode. Data cannot be obtained. Disconnect the USB cable, and then connect it.