Ricoh Aficio MP 2000 Network Guide - Page 78
Monitoring and Configuring the Printer, Parameter, Value con d, ID value, channel no., key value
View all Ricoh Aficio MP 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Monitoring and Configuring the Printer Parameter Value configured mode [ap|ad- You can set the in- hoc|802.11adhoc] frastructure mode(ap) , the 802.11 Ad hoc mode (802.11adhoc), or 2 the ad hoc mode (adhoc). The default is ad hoc mode. ssid "ID value" You can make settings for the SSID in the infrastructure mode. Usable characters are ASCII 0x200x7e (32 bytes). An SSID value is set automatically to the nearest access point if no setting is made. If no setting is made for the 802.11 ad hoc mode, the same values for the infrastructure mode or an ASSID value is automatically set. The default is blank. channel frequency "channel no." You can enable or disable the WEP function. To enable the WEP function, specify [on]; to disable it, specify [off]. To start the WEP function, enter the correct WEP key. The default is "11". Parameter Value configured key [ "key value" ] val [1|2|3|4] You can specify the WEP key when entering in hexadecimal. With a 64-bit WEP, you can use 10 digit hexadecimals. With a 128-bit WEP, you can use 26 digit hexadecimal. Up to four WEP keys can be registered. Specify the number to be registered with "val". When a WEP is specified by key, the WEP specified by key phrase is overwritten. To use this function, set the same key number and WEP key for all ports that transmit data to each other. Put "0x"on the front of WEP key. You can omit the numbers with "val". The key number is set to 1 when making these omissions. The default is blank. 70