Seagate OneTouch II OneTouch II Installation Guide - Page 5
System Requ, rements - firewire and usb
View all Seagate OneTouch II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
FireWire model includes: 6-pin to 6-pin FireWire cable Many laptop computers, have a smaller 4-pin FireWire port requiring a special 4-pin to 6-pin FireWire cable. This is not included, but is available for purchase at: http://www.maxstore.com 6-pin connector USB model includes: 'A' to 'B' USB cable The 'A' connector, typically, plugs into your computer and the 'B' connector plugs into your drive. If your computer has a different type of USB connection, you can purchase the correct type of cable from your local computer store. 'A' 'B' connector connector Combo model includes: 'A' to 'B' USB cable and 6-pin to 6-pin FireWire Cable System Requirements The following are the minimum system requirements. 1 Windows • Pentium III, 500 Mhz equivalent processor or higher • Windows® 98SE, Me, 2000 Professional, or XP Professional or XP Home Edition. All references to Windows 2000 actually refer specifically to Windows 2000 Professional. Retrospect Express does not work with the Server editions of these operating systems. • 128 MB RAM or more as required by Windows • CD-ROM drive • Available FireWire/1394/i.LINK or USB 1.1 or 2.0 port depending on model. USB 1.1 is slower than USB 2 or FireWire. • Internet connection (for software registration and updates) • Microsoft Internet Explorer version 5.01 For faster operation, add a FireWire port to your PC with Maxtor's 1394/FireWire PCI Card. Available at http://www.maxstore.com in North America. Macintosh • Mac OS 9.1 or higher or Mac OS X versions 10.1.2 - 10.1.5 and versions 10.2.4 or later. Though this model has both USB and FireWire interfaces, it is only possible to use one at a time. Mac OS 9 is compatible only with the FireWire inferfaces. Retrospect Express does not work with the Server edition of the Mac OS. Introduction 3