Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 107

Inbound Routing 3. Network Scanner 2 Press START/ ENTER and then to select FAX TRANSFER SETTING. ENTRY MODE 07:SYSTEM # MODE 08:STORE JUNK FAX # 09:DEPT. PASSCODE 10:BOOK ENTRY MODE 11:FAX TRANSFER SETTING 3 Press START/ ENTER . Make sure that SET is selected. 4 Press START/ ENTER . 3FA:EXNTRAYNMSOFDEER SETTING EN1T=ESRET#(01-10, , ) 2=CLEAR 3=ON/OFF FAX TRANSFER SET SETTING #= 5 Enter a 2-digit number from 01 to 41. This number is used to identify the set that you are storing. 6 Enter a name for the set by pressing the letter entry keys (see Step 6 on page 26). (Maximum of 20 characters.) If you don't want to enter a name, go directly to Step 7. 7 Press START/ ENTER . • If "TRANSFER ALL" has already been 3FA:EXNTRAYNMSOFDEER SET # 01 EN1T=EINRP#U(0T1T-1S0I,# , ) 2=TRANSFER ALL selected for a set, or if you are storing the set from a personal book, you must enter one or more sender's numbers (the display at right does not appear). The set number appears here Go to step 10. 8 Press or to select INPUT TSI# if you wish to only forward faxes from specific sender's numbers. Select TRANSFER ALL if you wish to forward all received faxes. 9 Press START/ ENTER . • If you selected TRANSFER ALL in Step 8, go to step 12. 105