Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 206

Optional Settings Setting 09: ERROR CORRECTION MODE (ECM) Select YES to have any distortions in a transmission due to noise on the telephone line corrected before print-out at the receiving end. This is only effective when the other machine has ECM as well. Select NO to turn the function off. Press or to make the selection and then press START/ ENTER . Note: If the transmission or reception is taking place in Super G3 mode, ECM will operate regardless of the ECM setting. ♦ Initial setting: YES Setting 10: AUTO COVER SHEET Select YES to have the fax automatically generate a cover sheet and send it as the last page of each transmission. Select NO to turn the function off. Press or to make the selection and then press START/ ENTER . ♦ Initial setting: NO Setting 11: FAX SCANNING WIDTH This setting selects the maximum scanning width. Press or to select 10 inches or 8.3 inches, and then press START/ ENTER . ♦ Initial setting: 10 inches Setting 12: COPY SCANNING This setting is used to reduce copies slightly before printing to ensure that data on the edges are not cut off. Press or to select AUTO for automatic reduction, or 100% for no reduction, and then press START/ ENTER . ♦ Initial setting: 100% Setting 13: COPY CUT-OFF This setting determines how the machine will copy documents that are longer than the printing paper. Select CONTINUE to have the remainder of the document printed on a second page, or CUT-OFF to cut off (not print) the remainder. Press or to make the selection, and then press START/ ENTER . ♦ Initial setting: CUT-OFF 204