Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 229

Messages and Signals 10. Troubleshooting MEMORY FULL ERROR PRESS STOP KEY MENU MODE NO CONF. FUNCTION NO PAPER ONHOOK DIAL MODE OUTPUT TRAY OFF PAPER JAM RCVD CONF. FAX REMOVE ORIGINAL(S) SIZE ERROR REPLACE TONER The memory is full (this message appears when Option Setting 23, Quick On-line, is set to NO). Press the STOP key to clear the message and cancel the transmission. The MENU key has been pressed. Confidential transmission was cancelled because the receiving machine does not have a confidential function, a confidential passcode is not programmed in it, its memory is full, or it is not a Sharp model. This indicates that you are out of paper. If the machine has multiple paper sources, the message will be followed by the paper source (or sources) that is out of paper in parentheses. If no paper source is indicated, all paper sources are out of paper. The SPEAKER key has been pressed and the machine is waiting for you to dial. The received document tray is not attached. Attach it as explained in Connections in Chapter 1 (the tray must be attached for the machine to operate properly.) The printing paper is jammed. See the following section, Clearing Paper Jams. A confidential fax has been received in memory. Print the fax as explained in Confidential Operations in Chapter 6. The original document is jammed. See the following section, Clearing Paper Jams. This message will be followed by one of the paper sources in parentheses, and informs you that the paper loaded in that source is not all the same size. The toner cartridge must be replaced. 227