Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 238

QUICK REFERENCE GUIDE SENDING FAXES Place the document (up to 50 letter-size pages) face down in the document feeder. (Note: For Normal Dialing and Direct Keypad Dialing, you can also load the document after dialing the number.) RESOLUTION CONTRAST Press or if needed. Normal Dialing 1. Lift extension phone or press SPEAKER . 2. Dial the fax number (if using an extension phone, dial on the extension phone keypad). 3. Wait for the reception tone (if a person answers, ask them to press their Start key). 4. Press START/ ENTER . Rapid Key Dialing Press the desired Rapid Key. Speed Dialing SPEED DIAL 1. Press and enter the desired Speed Dial number (press START/ ENTER if you entered less than 3 digits). 2. Press START/ ENTER . Direct Keypad Dialing 1. Dial the fax number. 2. Press START/ ENTER . STORING AUTO DIAL FAX NUMBERS 1. Press MENU and then or until ENTRY MODE is selected in the display. 2. Press START/ ENTER . Make sure that DESTINATION SETTING is selected. 3. Press START/ ENTER . Make sure that SET is selected. (To clear a number, select CLEAR .) 4. Press START/ ENTER . 5. To store a Rapid Key number, press the desired Rapid Key. SPEED DIAL To store a Speed Dial number, press and enter a number from 1 to 100 (FODC500/525) or 200 (FO-DC600) (press START/ ENTER if you entered less than 3 digits). (If clearing a number, select it as explained above and then press START/ ENTER STOP and .) 6. If the network scanner option is installed, SELECT DESTINATION TYPE will appear. Make sure that FAX is selected and press START/ ENTER . 7. Enter the full fax number and press START/ ENTER . 8. Enter a name by pressing the letter keys and press START/ ENTER . 9. Select YES if this is a Chain Dial number or NO if not, and press START/ ENTER . 10.If the dual-line option is installed, select LINE-1, LINE-2, or AUTO and press START/ ENTER STOP 11.Press repeatedly to exit. 236