Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 27
Entering Your Name and Fax Number
View all Sharp DC500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
1. Installation Entering Your Name and Fax Number Entering Your Name and Fax Number Before you can begin using the machine, you must program your name and fax number. Once you program this information, it will appear automatically at the top of each fax page you send. Important! FCC regulations require that your name, telephone/fax number, and the date and time appear on each fax message you send. Enter your name and fax number here and set the date and time as explained in the following section to have the machine include this information automatically at the top of your fax messages. Note: If you have installed the dual-line option, use the procedure on page 67 to enter your name and the number of each line. 1 Press MENU and then or until ENTRY MODE is selected in the display. Display: MENU MODE 1:RECEIVE MODE 2:LISTING MODE 3:ENTRY MODE 2 Press START/ ENTER and then or until OWN PASSCODE SET is selected. ENTRY MODE 01:DESTINATION SETTING 02:PASSCODE SETTING 03:OWN PASSCODE SET 3 Press START/ ENTER . OWN PASSCODE SET SENDER'S NUMBER 4 Enter your fax number (max. of 20 digits) by pressing the numeric keys. • To insert a space between digits, press . • To clear a mistake, press STOP . 25