Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 113

3. Network Scanner Using an LDAP Server: Searching for Destinations and User Authorization Select Enable for the LDAP setting and enter the IP address or network name of your LDAP server in LDAP Server. Enter settings for Search Root, Port Number, Timeout, User Name, Password, and Authentication Type (types supported are Anonymous, SIMPLE and DIGEST-MD5). Consult the administrator of the LDAP server for this information, and note that the LDAP server may have restrictions on the characters that can be entered for the password. In Applicable destination type, select what type of destinations will be searched (e-mail destinations, fax destinations, or both). When finished, click Submit to store the settings. Searching for a destination on an LDAP server (Global Address Book Search) Once the LDAP server settings have been completed as explained in the previous section, you can search for a destination on the LDAP server when faxing or sending an image by Scan to E-mail. ♦ Destinations on the LDAP server are searched for by name. ♦ You can also search for a destination on an LDAP server when selecting destinations for a Broadcast transmission. When you reach Step 3 of the Broadcast procedure on page 151, follow steps 2 through 9 below to search for the destination. 1 Load the document(s). SEND READY will appear in the display. • Press RESOLUTION and/or CONTRAST to set the resolution and contrast if needed. 2 Press Z GAB SEARCH . Display: GLOBAL ADDRESS SEARCH ENTER KEYWORD [ ] 111