Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 124

Installing the Printer Driver Installing the Printer Driver The SHARP PCL XL printer driver printer driver is provided in the CD-ROM in the FO-NP1 printer kit. This driver must be installed in every computer that uses the printer. Important: The printer driver cannot be installed unless the FO-NP1 Printer Expansion Kit and FO-LN1 LAN interface have been installed in the machine and the machine is ready for use as a network printer. ♦ Before installing the printer driver, be sure to read the "Readme" file on the CD-ROM (Option\English\Readme.txt) for the latest information. System Requirements You will need the following hardware and software in order to install the printer driver. Computer Operating System CPU RAM • IBM PC/AT or compatible computer equipped with an Ethernet interface • Windows 98 Second Edition, Windows Me, Windows NT 4.0 Workstation/Server (Service Pack 3 or later), Windows 2000 Professional/Server, XP Home/ Professional. • Windows 98 / Windows NT 4.0 / Windows Me / Windows 2000: Pentium, 200 MHz or higher • Windows XP: Pentium, 300 MHz or higher • Windows 98 / Windows NT 4.0 / Windows Me / Windows 2000: 64 MB or higher • Windows XP: 128 MB or higher Printing out the IP address of the printer In some cases it is necessary to enter the IP address of the machine when installing the printer driver. To check the IP address, follow the procedure in Printing out the Network Settings on page 79. 122