Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 72
Restricting a line to transmission or reception, selecting the reception mode for Line 1
View all Sharp DC500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Dual-line Option (FO-DC600 only) ♦ If you wish to restrict either of the lines to transmission only or reception only, see the following section. ♦ When you program an auto-dial number (Rapid Key or Speed Dial number), you can specify that the number use a particular line. Note: The LINE @ key cannot be used to select a line if either of the lines has been set to reception only as explained in the following section. A line selection made with LINE @ will override a line selection programmed into a Rapid Key or Speed Dial number. Restricting a line to transmission or reception / selecting the reception mode for Line 1 You can restrict either line to transmission only or reception only. You can also use this procedure to select the reception mode (AUTO or MANUAL) for Line 1 (the reception mode for Line 2 is fixed at AUTO). 1 Press MENU and then so that LINE SETTING MODE is selected in the display. Display: MENU MODE 1:LINE SETTING MODE 2:LISTING MODE 3:ENTRY MODE 2 Press START/ ENTER . • Line 1 is intially selected. If you wish to adjust the setting for Line 2, press to select LINE 2. LINE SETTING MODE 1:LINE 1 2:LINE 2 70