Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 44
Chain Dialing for area and access codes
View all Sharp DC500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Programming Auto-Dial Numbers 12 If the dual-line option is installed (and Chain Dial was set to NO in the above step), SELECT THE LINE will appear. Select LINE-1 if you want the auto-dial number to use only Line 1. Select LINE-2 if you want the autodial number to only use Line 2. Select AUTO if you want the auto-dial number to use the first available line. Press or to make the selection, and then press START/ ENTER . 13 STOP Return to Step 5 to program another number, or press repeatedly to return to the date and time display. • If you programmed a Rapid Key number, you can write the name of the party on the label above the Rapid Key. Chain Dialing for area and access codes You can also program an area code or access code in a Rapid Key or Speed Dial number using the above programming procedure. In Step 10, select "YES" to set the number as a Chain Dialing number. After you dial an area code or access code using a Rapid Key or Speed Dial number set for Chain Dialing, the machine will wait for you to dial the remainder of the number (you can dial the remainder of the number by pressing a Rapid Key, by pressing the Speed Dial key and entering a Speed Dial number, or by pressing numeric keys). Note that the remainder of the number should not be set as a Chain Dial number if programmed in a Rapid Key or Speed Dial number. ♦ The maximum number of digits that can be dialed at one time by Chain Dialing is 60. 42