Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 21

1. Installation Installing the Print Cartridges 3 If you are replacing the drum cartridge, remove the old cartridge and dispose of it according to local regulations. 4 Remove the new drum cartridge from its packaging. Insert the drum cartridge into the print compartment. • Caution! Excessive exposure to light will damage the drum cartridge. Install the cartridge promptly after removing it from its packaging. • Make sure the drum cartridge is inserted in as far as it will go. 5 If you are installing a new toner cartridge, remove the new toner cartridge from its packaging. Remove the tape from the cartridge and then open the cartridge handle so that it stands straight up. 6 Shake as indicated by the arrows to distribute the toner evenly within the cartridge. • If the toner is still lumpy after shaking, the gears in the cartridge may make a noticeable sound when the print compartment cover is closed after installing the cartridge. This is normal and does not indicate a problem. BLUE GREEN 19