Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 193
Clearing the Print Hold code
View all Sharp DC500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
Print Hold Clearing the Print Hold code Follow the steps below if you need to clear the Print Hold code. Note: To clear the Print Hold code, Option Setting 38 must first be set to NO. 1 Press MENU and then . • Make sure that PRINT HOLD is selected in the display. Display: MENU MODE 6:SERIAL POLLING MODE 7:MEMORY POLL MODE 8:NETWORK SETTING 9: PRINT HOLD 2 Press START/ ENTER and then . • Make sure that PRINT HOLD CODE CLEAR is selected in the display. PRINT HOLD 1:PRINT HOLD DATA PRINT 2:PRINT HOLD CODE SET 3:PRINT HOLD CODE CLEAR 3 Press START/ ENTER . 4 Press the numeric keys to enter the Print Hold code. 5 Press START/ ENTER . 6. Special Functions 191
Print Hold
191
6. Special
Functions
Clearing the Print Hold code
Follow the steps below if you need to clear the Print Hold code.
Note:
To clear the Print Hold code, Option Setting 38 must first be set to NO.
1
Press
and then
.
•
Make sure that PRINT HOLD is
selected in the display.
2
Press
and then
.
•
Make sure that PRINT HOLD CODE
CLEAR is selected in the display.
3
Press
.
4
Press the numeric keys to enter the Print Hold code.
5
Press
.
MENU
START/
ENTER
START/
ENTER
START/
ENTER
Display:
MENU MODE
6:SERIAL POLLING MODE
7:MEMORY POLL MODE
8:NETWORK SETTING
9: PRINT HOLD
PRINT HOLD
1:PRINT HOLD DATA PRINT
2:PRINT HOLD CODE SET
3:PRINT HOLD CODE CLEAR