Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 205
Setting 05: TRANSACTION REPORT PRINT SELECTION, Setting 06: RECALL TIMES, Setting 07: RECALL
View all Sharp DC500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
Optional Settings Setting 05: TRANSACTION REPORT PRINT SELECTION This sets the condition for printing out a Transaction Report. Press or to select one of the following conditions, and then press START/ ENTER ERROR/TIMER/ MEMORY: SEND ONLY ALWAYS PRINTS NEVER PRINTS A report will be printed after an error, timer operation, or memory operation A report will be printed only after a transmission A report will be printed after each transmission, reception, or error A report will never be printed. ERROR ONLY A report will be printed only after an error occurs ♦ Initial setting: ERROR ONLY Setting 06: RECALL TIMES This sets the maximum number of times your fax will automatically redial if the line is busy. Enter any number from 0 0 to 1 4 . ♦ Initial setting: 02 Setting 07: RECALL INTERVAL This sets the amount of time your fax will wait between automatic redials when the line is busy. Enter 0 1 for 1 minute, 0 2 for 2 minutes, etc., up to a maximum of 15 minutes. ♦ Initial setting: 05 Setting 08: SECURITY SELECTION Select ON to turn polling security on, or OFF to turn it off. Press or to make the selection and then press START/ ENTER . ♦ Initial setting: ON 7. Optional Settings 203