Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 52

Sending a Fax by Automatic Dialing • If no numbers have been stored under the entered letter, NOT FOUND will appear. • If multiple fax numbers (or e-mail addresses) have been stored under a name, press A to display the fax numbers and then press or to select the desired fax number (or e-mail address). 5 Press START/ ENTER . The document will be automatically transmitted once the connection is established. Chain Dialing An auto-dial number set for Chain Dialing can be combined with another autodial number or digits entered manually with the numeric keys to dial one phone number up to 60 digits long. The following are some examples of how this can be done: ♦ Press appropriate Rapid Keys in the proper order. For example, press Rapid Key 01 (set for Chain Dialing), then Rapid Key 02 (not set for Chain Dialing). ♦ Press a Rapid Key (set for Chain Dialing) and then manually enter a number by pressing appropriate numeric keys. Press START/ ENTER after the final numeric key to begin transmission. If the memory becomes full... If the memory becomes full while a document is being scanned, MEMORY FULL will appear in the display. If Option Setting 23 (Quick On-line) is set to ON, scanning will automatically resume when memory becomes free again as pages are transmitted. (Note: Quick On-Line is initially set to ON at the factory. To change the setting, see page 207.) If Quick On-Line is set to OFF the transmission will be canceled and STOP MEMORY FULL ERROR will appear in the display. Press to clear the message. Try the transmission again later when memory is free. 50