Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 98

Sending an Image Using a Rapid Key or Speed Dial Number 10 Enter the name of the party by pressing the letter entry keys (max. of 20 characters). (Make sure the Rapid Key overlay is flipped down.) 11 Press START/ ENTER . DESTINATION SET SELECT FILE FORMAT 1:TIFF-G4 2:TIFF-G3 3:TIFF-NO COMPRESSION 4:PDF-G4 5:PDF-G3 12 Press or to select the file format (TIFF or PDF) and compression method (G3, G4, or NO COMPRESSION) for the document that will be sent as an e-mail attachment. (Note: You can override this setting during the transmission procedure.) 13 Press START/ ENTER . 14 STOP Return to Step 5 to program another number, or press repeatedly to return to the date and time display. • If you programmed a Rapid Key number, you can write the name of the destination on the label above the Rapid Key. Editing a Rapid Key or Speed Dial number To make changes in a Rapid Key or Speed Dial number, repeat the programming procedure. Select the Rapid Key or Speed Dial number for which you want to make changes in Step 5, and then change the programmed information as needed in the following steps. Clearing a Rapid Key or Speed Dial number To clear a Rapid Key or Speed Dial number, select CLEAR in Step 3 of the programming procedure, press START/ ENTER , select the Rapid Key or Speed Dial number as explained in Step 5, and then press START/ ENTER . 96